Idiomas disponibles
Idiomas disponibles
ATTACHING FALL ARREST SYSTEM
Fall arrest system should only be connected to the attachment
·
elements of the harness marked by capital letter
system must only be connected to: - front attachment D-ring —
Fig. (2) or frontal attachment D-ring. The dorsal attachment D-ring is
dorsal attachment D-ring (2)
1
marked by capital letter placed on the label sewn
The frontal attachment D-ring is marked by capital letter placed on
the crossing plate below the D-ring.
ATTACHING WORK POSITIONING/RESTRAINT SYSTEM (EN
·
358) Work positioning or restraint system can be attached to
lateral buckles of the work positioning belt (3) or to the frontal waist
harness (sit harness) buckle (4)
Work positioning lanyard must be
·
attached on a structural point located at
positioning lanyard
should be tightened in order to restrict
WARNING-
1) It is strictly forbidden to attach any fall arrest system to lateral buckle of the work positioning belt during work.
2) It is strictly forbidden to attach any fall arrest system to frontal buckle designed for use as a sit harness according to EN
813.
THE ESSENTIAL PRINCIPLES FOR USERS OF PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT
-
-
normal and emergency use.
a rescue plan shall be in place to deal with any emergencies that could arise during the work.
-
-
-
-
-
-
-
function of another.
-
-
-
periodic inspection must be carried out by
a competent person for periodic inspection. The periodic inspection can be carried out also by the manufacturer or his authorized
-
-
-
-
-
The fall arrest
the D-ring.
to figures
EN 358
A
EN 358
fected by or interferes with the safe
.
The
