BADU OmniTronic Traducción De Las Instrucciones Para El Manejo Originales página 82

Installation
Fig. 3
5.2 Installation
The BADU OmniTronic can be installed above or below the water
level.
For installation below the water level, observe the following points:
• If the BADU OmniTronic is installed between 1 m and 3 m
below the water level, a spring loaded SPECK non-return
valve must be installed (a).
• Installation at 3 m to 6 m below the water level should be
avoided. Deeper than 6 m is not permitted.
• Either a spring loaded SPECK non-return valve (article no.
240.9102.063) or an assembly bow to the water level must
be installed in the sewage line (b).
30 EN 04|2019