Technical Specifications; Safety Instructions; Instructions For Power Safety; Safety In Your Working Environment - Menzer LHS 225 VARIO Manual Original

MENZER LHS 225 VARIO
LONG-NECK SANDER
Original instructions
Dear customer,
By purchasing the MENZER LHS 225 VARIO Long-Neck Sander you have selected a product of the high-
est quality. We would hereby like to express our gratitude for the trust you have shown in us and our tools.
Before using your power tool for the first time, please take the time to read the operating and safety instruc-
tions on the following pages. Close observance of the information contained here will ensure an optimum
result for your work. The safety warnings are intended to protect you from accidents that could be caused
by improper use of the long-neck sander.
The MENZER Team
TABLE OF CONTENTS
The user of this long-neck sander is strongly advised to acquaint his or herself with the machine's design,
technical requirements, operating procedures for safe use, correct maintenance and repair procedures and
the storage and application instructions described here. The user who operates this machine does so at
his or her own risk and assumes full responsibility for that operation. These instructions should be kept and 1.

TECHNICAL SPECIFICATIONS

used for future reference.
2.

SAFETY INSTRUCTIONS

2.1

Instructions for power safety

1. TECHNICAL SPECIFICATIONS
2.2

Safety in your working environment

2.3 Operating safety tips
Model: MENZER LHS 225 VARIO
Voltage: 3. OPERATING THE MACHINE 230 V ~ 50 Hz / 110 V ~ 50 Hz
Power consumption: 710 W 3.1 Starting off
Speed: 3.2 Operating the machine 1,000–2,100 min
-1
Driving disc: 3.2.1 Connecting an industrial vacuum cleaner Ø 225 mm
Weight: 3.2.2 Operating the long-neck sander 4.9 kg
3.2.3 Sanding walls and ceilings
3.2.4 Changing the sanding disc
2. SAFETY INSTRUCTIONS
3.2.5 Adjusting operating length
The MENZER LHS 225 VARIO Long-Neck Sander has been designed for renovation works and is suitable 4. STORAGE
for the sanding of all wall and ceiling materials, paint, varnishes, fillers and wood surfaces. It has also been
5. MAINTENANCE
specially designed for use in conjunction with an industrial vacuum cleaner for removing fine dust particles
5.1 from your working environment. Troubleshooting
5.2 Replacing the sanding wheel
5.3 Replacing the brush rim
2.1 INSTRUCTIONS FOR POWER SAFETY
6. MACHINE DETAILS
• This machine may be connected ONLY to sockets that provide the operating voltage displayed on the
7. machine's identification label, and that are grounded in accordance with all applicable regulations. CE DECLARATION
• Avoid allowing your long-neck sander to come into contact with water, for example rain water, wetness or 8. TERMS OF GUARANTEE
dampness. Water that seeps in could cause the machine to short-circuit, thus causing long-term damage
in the process. Furthermore, there is a risk of electrocution for the operator in such situations.
• Keep the external power cable at a distance from the sanding wheel so that it does not come into contact
with the abrasive, which could damage the cable's insulation. Never attempt to make alterations to the
plug connector or other machine parts that have electrical contact.
• Should you need to use an extension cable, it must have a sufficient conductor cross-section.
• Do not use the external power cable as a means of carrying the long-neck sander or for hanging the de-
vice. Do not pull on the cable when you wish to disconnect the sander from the power supply. Keep the
cable away from sharp edges, heat, oil and other chemicals.
• In the event of a damaged power cable, have the part replaced by a trained professional. Do not attempt
to use the sander when there are signs of damage to the cable.
2.2 SAFETY IN YOUR WORKING ENVIRONMENT
• Ensure that your work area is always well-ventilated and well-lit so as to prevent potential accidents. In
order to minimise dust levels, attach a compatible industrial vacuum cleaner to the sander.
Version 1.3.2
EN 3
EN 3
EN 3
EN 3
EN 4
EN 5
EN 5
EN 5
EN 5
EN 5
EN 6
EN 6
EN 6
EN 6
EN 6
EN 7
EN 7
EN 7
EN 8
EN 10
EN 11
EN 3