ARIETE XForce Manual Del Usuario página 9

surfaces.
20 Never use the appliance if the power cord is damaged.
21 If the cord is damaged, it must be replaced by the Manufacturer, by an Author-
ised Technical Assistance Centre or in any case, by a similarly qualified person,
in order to prevent any risks.
22 Always switch on the appliance with the power regulator set to minimum.
23 Unplug the appliance from the mains electricity after each use.
24 In the event that you decide to dispose of the appliance, we advise you to make
it inoperative by cutting off the power cord. We also recommend that any parts
that could be dangerous be rendered harmless, especially for children, who may
play with the appliance or its parts.
25 Packaging must never be left within the reach of children since it is potentially
dangerous.
26. To dispose of product correctly according to European Directive 2009/96/
CE, please refer to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (Fig. 1)
A Foot-operated on/off switch
B Dust container lock/release button
C Suction device coupling
D Dust container
E Foot-operated cord rewinder button
F Suction power regulation dial
G Parquet brush
H Crevice nozzle with brush
ATTACHMENTS
Floor brush (O)
- Ideal for cleaning large areas as well as corners that are difficult to reach.
- We advise against using the brush to clean carpets and resistant floors. The brush has wheels
to allow it to glide over all surfaces. Select the required projection for the bristles by pressing the
lever at the end of the brush. To retract the bristles, press the lever marked with the
carpet symbol.
- For better preservation and protection of smooth flooring such as PVC, parquet or tiles, it is better
to use the brush. To lower the bristles, press the lever marked with the
symbol.
I Suction device
L Release buttons
M Manual air inlet valve
N Handle
O Floor brush
P Sliding device
Q Telescopic tube
- 7 -
EN
smooth flooring