Fender Passport 150 PRO Instrucciones De Funcionamiento página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
5. Connect each of your microphones, instruments
and other sound sources into separate channels
using the appropriate type of input jack. Use the
mono channels on the left for monophonic sources
such as microphones and use the stereo channels
on the right for stereo/mono sources such as CD
players, mp3 players, keyboards and other line level
audio devices.
PAD
PAD
MIC
MIC
LINE
LINE
STEREO
LEVEL
OUT
6. Rotate the master Volume knob, all channel Level
knobs and all Reverb knobs fully counter-clockwise
to start.
VOLUME
1
2
LEVEL
LEVEL
TONE
TONE
REVERB
REVERB
PAD
PAD
7. Turn on all equipment connected to the Passport first,
then switch the Passport on. The Power LED on the
Passport should
illuminate green.
Passport® 150 Pro
Passport® 150 Pro
STEREO
STEREO
L / MONO
L / MONO
RIGHT
RIGHT
POWER
TONE
3
4
LEVEL
LEVEL
TONE
TONE
REVERB
REVERB
STEREO
STEREO
LEVEL
POWER
fender.com
fender.com
8. Turn the master Volume knob up to 1/4 volume.
VOLUME
9. Pick up a microphone (or other source) and use
it at the intended level while slowly turning up
the corresponding channel Level knob. Watch the
signal LED above the Level knob occasionally. It
illuminates green with an input signal level present,
yellow when the input signal gets closer to clipping,
and red during clipping (distorting). If you see
red, reduce the input signal level at the source or
engage the PAD switch to avoid signal distortion
and overloading the amplifier's input stage.
1
2
LEVEL
LEVEL
10. Set up each of the other channels in the same way.
Use the channel Level knobs to adjust the relative
loudness of each channel
until you get the right
overall balance, then use
the master Volume knob to
adjust everything together.
11. Start with each of the Tone knobs in the center
detent position. At this setting
they have no equalization effect.
TONE
From there you can experiment
by turning each tone control to
see what sounds best to you. If
REVERB
R
possible, have someone walk to
each corner of the room and make sure the settings
and speaker positions provide clear and consistent
coverage throughout your audience.
Basic set-up is now complete! The following
pages contain detailed information on each of the
Passport 150 Pro's many features.
TONE
3
4
LEVEL
LEVEL
VOLUME
TON
7
7
Tabla de contenido
loading

Tabla de contenido