Re-Assembling; Replacing The Light Bulb - Fujioh FSR-30 Manual De Operación

3
Range hood body
Wipe the range hood body off with a cloth
immersed in a mild detergent. Then, wipe off
moisture thoroughly with a dry cloth.

Re-assembling

Re-assembly will be done by following the disassembly procedure in reverse order described
in Item "disassembling".
(1) Make sure that the filter is fixed in the appropriate position firmly.
(2) Make sure that there is no abnormal vibration sound when running blower.

Replacing the light bulb

Two 13 Watt compact fluorescent light bulbs (not supplied) can be installed in this range
hood.
The light bulbs to purchase are two compact fluorescent light bulbs (Minitwist, E26, 120V,
13W).
The following light bulbs are recommended for this range hood.
• SYLVANIA CF13EL/MICRO 120 V, 13 W
1
Remove the rectifier panel (refer to page 7
"Disassembling").
NOTE:
As the panel may have grease build-up, be
careful when removing it.
2
Replace the light bulb with a new one.
3
Fasten the two screws firmly after
re-assembling the rectifier panel.
8
Mounting screw
Catch