Installing & Cleaning Foam Sleeve Filter - Craftsman 125.16829 Manual Del Operador

Maintenance (continued)
IMPORTANT! Clean or change the dust
filter regularly for best performance.
ALWAYS USE DUST FILTER FOR DRY
VACUUMING. If the machine is used
without the dust filter, the motor will
burn out and the warranty will be
voided. Always keep spare filters on-
hand.
Installing & Cleaning Foam Sleeve Filter
1
Installing Foam Sleeve Filter
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Remove power head and place
in upside down position. Follow
instructions to remove cloth filter.
3. Carefully slide foam sleeve filter
down over the filter cage making
sure the whole cage is covered.
(Fig. 2 & 3)
4. Replace the power head onto the
collection tank.
2
WARNING: Always disconnect
the plug from the power outlet
before removing the power head
from the collection tank.
3 4
Cleaning Foam Sleeve Filter
1. With the removed power head in
the upside down position, carefully
remove foam sleeve filter. (Fig. 4)
2. Use a mild soap and water solution
to wash foam sleeve filter and rinse
with clean water. (Fig. 5)
3. Allow filter to air dry before installing
and using again.
11
5