Intended Use; Technical Description - Dometic GROUP MCR-7 Instrucciones D’uso

MCR-7.book Seite 7 Mittwoch, 30. Januar 2008 11:48 11
MCR-7
Please read this manual carefully before starting up and store it in a safe place. If
passing the device on to another person, hand over this operating manual along
with it.
Contents
1

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2

Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1 Intended use
The MCR-7 remote control is suitable for switching on/off the following invertersvia the the
"remote port II " (see also the operating manual for theinverter):
MSP700, MSP1000, MSP1500, MSP2000, MSP2500
SP700, SP1000, SP1500, SP2000, SP3000
2 Technical description
2.1 Power display
No. in
fig. 1,
Description
page 3
1 Battery
2 Output Power
Meaning
This bar graph shows the battery voltage in volts.
The display should be in the green area. If the display is
above or below in the red area, a warning tone sounds,
the display flashes and the inverter will be switched off.
This bar graph displays the output power received by the
appliance as a percentage.
The display should be in the green or orange area. If the
display goes over into the red area, a warning tone
sounds, the display flashes and the inverter will be shut
off.
Intended use
7