Dometic GROUP MCR-7 Instrucciones D’uso página 9

MCR-7.book Seite 9 Mittwoch, 30. Januar 2008 11:48 11
MCR-7
3 Connection
➤
Insert one side of the RJ-11 cable in the socket "To inverter" (fig. 2 2, page 3).
➤
Insert the other side of the RJ-11 cable into the "Remote Port II" of the inverter.
Switching on/off by external signal
The remote control enables the optimal switching on/off of the inverter by external signal:
➤ Loosen both Phillips screws and take off the cap (fig. 2 1, page 3).
➤
Set the desired connection on the jumper (fig. 2 3, page 3):
– Jumper open (A): Switching offinverter-by positive batteryvoltage
When a plus-signal is present on the control cable, the inverter is switched off.
(suitable e. g. for roof air conditioners). If no signal is received, then the inverter
works in the previously activated function.
– Jumpers are connected (B): Switching on inverter by positive battery voltage
When a plus signal is present on the control cable, the inverter is switched on,
and remains on as long as the plus signal is present.
➤
Put on the cap (fig. 2 1, page 3).
e Caution!
The control cable has to be secured by a suitable fuse (≤ 1 A.)
➤
Connect the control cable (12 V or 24 V) at the (fig. 2 4, page 3) remote control-
connection.
4 Service
➤
With the "On/Off" button (fig. 2 2page 3) switch the inverter on or off.
✓
An acoustic signal sounds.
5 Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
If you need to scrap the device, ask your local recycling centre or specialist deal-
er for details about how to do this in accordance with the applicable disposal reg-
ulations.
Versions, technical modifications and delivery options are subject to alteration.
Connection
9