Common Operation - Lenco CS-472 Manual De Instrucciones

2. Common Operation

1. To turn on/off the unit
Under power off mode, press the POWER button to turn on the unit.
Under power on mode, press and hold the POWER button on the front panel or briefly press
the POWER button on the remote control to turn off the unit.
2. To select function mode
Press the MODE button to select TUNER, USB (After inserting a
USB storage), Card(After inserting a SD card) AUX mode.
During playing , select the
Press and hold the MODE button the display can be turned off
but the unit keeps working, when we press whatever button it
returns on.
3. To adjust sound level
Rotate the VOL knob or press or hold the + or - button to directly adjust the volume level.
4. To mute sound
Press the MUTE button on remote control to turn on/off MUTE mode.
Briefly pressing the POWER button on the front panel also can turn on/off MUTE mode.
In MUTE mode, the MUTE mode can be released by pressing the following knob/buttons:
VOL, + , - and SEL.
5. To display and adjust the time
Press the CLK button to display time.
Press and hold the CLK button and then rotate the VOL knob or press the + or - button to adjust the time.
You can also adjust time in SETUP mode.
6. To select a preset EQ mode
Press the EQ button to select the preset music equalizer curves: FLAT,
CLASSIC, ROCK, POP, EQ OFF . The sound effect will be changed.
7. To remove the front panel
Press the REL button on the front panel to detach the front panel from the unit, then you can
remove the front panel.
8. To turn on/off LOUDNESS mode
Press the LOUD button to turn on/off LOUDNESS mode.
When turning on LOUDNESS mode, it will enhance bass level immediately when the bass is not enough.
9. To reset the unit
When the display is incorrect, or the function buttons are not effective or sound
is distorted, press the REL button to detach the front panel from the unit and
remove it, then use the sharp end of a thing to press the RESET button, which
will reset to factory default, and re-instate the correct functions.
10.To adjust sound modes
To adjust the sound modes, briefly and repeatedly press the SEL button on the
front panel to select one of the sound modes such as : VOL, BAS(without preset
EQ), TRE (without preset EQ), BAL, FAD .
to up to the main Menu.
7
Mode Menu