Product Maintenance - Hkoenig STM45 Manual De Utilización

Plancha de vapor vertical
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
When the steam tube bending, it happen to emit cooing sound.
Water bead may be
appeared on the steam holes and the amount of steam will decrease significantly. Lift the handle
for 2-3 seconds in this case, everything will be ok.
6. After ironing the front of clothes, turn the clothes over to iron its back.
Ironing Pants Line:
Take out the pants line clip, insert the metallic clasps at bottom of ironing
brush into plastic slot of the pants line clip, press down the handle to open the
interface between pants line clip and ironing brush, clasp the pants line and
move the ironing brush gently up and down to make the pants line rightly
straight. The dismounting is in a reverse order.

PRODUCT MAINTENANCE

1. Purified water is recommended in order
to avoid contaminating the textiles.
The contents of mineral substance differ in
various kinds of water, so there would be
sediments to respective extents if the ironing machine is
applied with water of different qualities, which makes the
steam flow lessens, intermits or even stops. Therefore, in
order to avoid contaminating the textiles, the purified
water is recommended. However, the two filters inside the
steam gun may filter away the impurities in the water and
the boiler scale in the heating element, thus to make the
water clear.
2. To better maintain the machine, the machine,
when used for a certain period, may be cleaned
or maintained as follows, in which we suggest to
take the both steps together:
* Cleaning the water tank
>>>Related parts: water tank and tank filter
>>>Cleaning frequency: Clean every 1 month or 20L water
is consumed, which period may be prolonged or
shortened according to the actual water quality.
Tabla de contenido
loading

Tabla de contenido