Tabla de contenido
11. BATTERY KIT (Optional)
The buffer battery kit enables the operation in the event of a
mains power cut.
To position the battery kit on the gearmotor, please refer to the
following instructions:
1.
Remove the motor housing, Fig. 19 ref. a.
2.
Place the battery kit in its seat, Fig. 19 ref. b
3.
Re-position the motor housing, Fig. 19 ref. c
To connect the battery kit, please refer to the instructions of the
control unit.
The batteries starts operating whenever a mains power cut is
detected. The operation of the battery powered automated
system is to be considered as an emergency situation.
The number of cycles possible with the automated system
battery powered depends directly on the battery status,
on the time elapsing since mains power was cut, on the
gate structure, etc
MILORD 424 ENV - MILORD 824 ENV
Page
Guide for the installer
Tabla de contenido
