Tabla de contenido
Idiomas disponibles
Idiomas disponibles
output of the battery terminals is optimal and whether the wiring harness is properly connected to
the battery. Solve any issues in a timely manner.
(5) Before riding, check whether the battery level is sufficient for the expected mileage. If the battery
level is insufficient, please supplement by pedaling the bicycle so as to avoid battery undervoltage.
(6) Before riding, check whether the motor works properly. Start the motor and adjust its speed to
visually inspect and listen to the motor. If there is any unusual behavior, it should be repaired in a
timely manner.
(7) Before riding, check whether the lights and bell are working properly, especially when riding at
night. The front light is supposed to be bright and its light beam should fall in a range of 5–10 meters
in front of the bicycle. The bell is supposed to ring loudly, and the dashboard should work normally.
(8) Before riding, check whether all parts are properly fastened. For example, the handle bar, handle
post, saddle, seat post, front wheel, rear wheel, crank axle, locknut, and pedals. If any part is loose or
lost, it should be tightened or replaced immediately. The recommended torque specifications are:
Handle post 18–20 N·m, saddle18–25 N·m, Handle bar 6–8 N·m, Front wheel 50–60 N·m, Rear wheel
35–45 N·m, Crank axle nut 35–50 N·m, Pedals 35–45 N·m.
•
As with other sports, bicycling involves risk of personal injury and damage of the bike. By choosing
to ride a bike, you assume the responsibility for that risk, so you need to know and to practice
the rules of safe and responsible riding and of proper use and maintenance. Proper use and
maintenance of your bike reduces risk of injury.
•
The combination of the ⚠ ️ safety alert symbol and the word
hazardous situation which, if not avoided, could result in serious injury or death.
•
The combination of the ⚠ safety alert symbol and the word
hazardous situation which, if not avoided, may result in minor or moderate injury, or is an alert
against unsafe practices.
CAUTION
•
The word
avoided, could result in serious damage to the bike or the voiding of your warranty.
•
Many of the warnings and precautions say "you may lose control and fall". Since any fall can result in
serious injury or even death, these warning of possible injury or death will not always be mentioned.
•
Please read the warning message on the handle bar: Before each ride, make sure the handle post
hinge is properly tightened and safely secured.
•
Since it is not possible to predict every situation or condition that may occur during cycling, this
user manual does not represent a safe use of the bike in all situations. There are risks associated
with the use of any bike which cannot be predicted or avoided, and which are the sole responsibility
of the rider.
•
Additional safety, performance and service information for specific components such as
suspension or pedals on your bike, or for accessories such as helmets or lights that you purchase,
may also be available. Make sure you are informed all the details of the manufacturers that was
included with your bike or accessories.
•
If you have any questions, consult with the bike shop or the manufacturer for the detailed
information.
•
You may ride the bike only after you have carefully read this manual and are familiar with the
product performance.
•
Untrained individual is not allowed to use this product.
•
Before riding, check the voltage meter cable, buttons, and data display.
•
Before riding, check the tire pressure (recommended: 35 - 45 PSI).
•
Wear a helmet when riding and comply with traffic regulations.
•
This bicycle is suitable for riding on paved urban roads. It is not recommended to ride it on other
terrains to avoid danger.
used without the safety alert symbol indicates a situation which, if not
13
WARNING
indicates a potentially
CAUTION
indicates a potentially
Tabla de contenido
