Connect With Mi Home/Xiaomi Home App - Xiaomi Mi XMDZLZXC01QJ Manual De Instrucciones

7. Connect with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app*.
Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app
is installed already. Or search "Mi Home/Xiaomi Home" in
the App Store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper
right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on
your device should be taken as the default.
Note: The version of the app might have been updated,
please follow the instructions based on the current app
version.
Troubleshooting
Fault
Unable to charge
Cannot turned on
No pedal assist
Display does not function
Light is not working
Pedal cannot be installed
properly
Pedal makes a strange
sound
Tire leaks air
Unable to remove battery
Reduced mileage
Seat post slides down
Solution
Use the original charger.
Low battery, try to recharge it.
Battery level equals to or is less than 5%, no assistance.
Low battery, try to charge it.
Low battery, try to charge it.
The pedals are divided into a left and right pedal. The left pedal is
tightened counterclockwise, and the right pedal is tightened clockwise.
Use a tool to tighten the pedal.
Tires and 16 inch bicycle parts can be repaired nearby.
After removing the seat post, press and hold the button above
the battery to remove it.
Temperatures below -5°C will greatly affect the battery capacity. Once the temperature
rises, the capacity will return to normal without affecting the battery life.
Manually tighten the upper and lower seat post clamp screws before
tightening them by a wrench.
9