Idiomas disponibles
Idiomas disponibles
Install tongue.
Join the tongue with the mast (with
mast tilted) aligning the holes as
shown. Assembly may be easier by first
installing tongue in vehicle's hitch.
If your vehicle's hitch is 1 1/4": remove the 2" hitch adapter.
For 2" hitches:
proceed to next step.
Remove the
screw from the
adapter using
the large hex
wrench.
Insert tongue into vehicle's hitch.
IF SPARE
TIRE CAUSES
INTERFERENCE,
DO NOT USE
THIS PRODUCT!
Align the holes in
the receiver to the
holes in the tongue.
1035681C-2/15
Secure tongue.
• Install bolt and a flat
washer.
• Add a second
washer, attach nut.
Remove the
adapter from
the tongue.
Lock mast in the full upright position.
LiteRider mast must be
locked in the upright
position before loading
bikes or moving vehicle!
UNLOCKED!
LOCKED
• use the small hex
wrench and closed
wrench to tighten
completely.
