Starter Rope - Cub Cadet 260 Serie Manual Del Operador

Starter Rope

1. Disconnect the spark plug boot from the spark plug (refer
to the Engine Operator's Manual).
2. Pivot the control handle against the upper handle and pull
the rope out of the engine.
3.
Loop the rope through the eye bolt. See Figure 3-3.
4. Tighten the eye bolt to the handle using the lock nut. DO
NOT overtighten.
10 S 3 — A
ection SSembly
Figure 3-3
& S -U
et p
Set-Up
Gas and Oil Fill-Up
Refer to the Engine Operator's Manual for additional engine
information.
1. Add oil provided before starting unit for the first time.
2. Service the engine with gasoline as instructed in the
Engine Operator's Manual.
WARNING:
Use extreme care when handling
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel the machine
indoors or while the engine is hot or running.
Extinguish cigarettes, cigars, pipes and any other
sources of ignition.