Manual Setting - Toshiba REGZA WL66 Serie Manual Del Usario

Below are the answers to some of the most common queries.
For more information go to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the mains switch is on and check all mains
connections.
Check the television is not in standby mode.
Q
There is a picture, but why is there little or no
colour?
A
When using an external source, for instance, a
poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The
colour is factory set to Auto. to automatically display the
best colour system.
To check that you have the best colour:
With the external source playing, select Manual
1
setting from the SET UP menu.

Manual setting

Colour system: Auto.
EXT2 A
Store
OK
Back
MENU
With up or down choose between Auto., PAL,
2
SECAM, NTSC 4. 43 or 3. 58.
Q
Why doesn't the video/DVD being played show
on screen?
A
Make sure the VCR or DVD player is connected to
the television as shown on page 6, then select the
correct input by pressing
B
Q
Why is there a good video picture but no sound?
A
Check all lead connections.
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or
that sound mute has not been selected.
Q
uestions
V C R
Watch TV
EXIT
.
A
nswers
and
Q
Why is the VCR/DVD picture in black and
white?
A
Check the correct input has been chosen,
S-VIDEO or AV. See AV connections page.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different
television station. Manual fine tuning may help.
Select the Manual tuning menu. Highlight the
1
station and press OK, then press right to select
Manual fine tuning.
Using up or down adjust to get the best picture
2
and sound. Press OK and then EXIT.
1 I
OK Store
Back
MENU
Q
Why don't the controls on the front of the
television work?
A
Check that Panel lock is not ON.
Q
Why doesn't the remote control work?
A
Check the side switch on the remote control is in
TV mode.
Check the batteries aren't dead or inserted incorrectly.
Q
Why is there a message permanently on the
screen?
A
Remove it by pressing
Q
Why are there vertical stripes on the screen
when in PC mode?
A
The Sampling clock may need adjustment. Select
PC Setting from the SET UP menu, highlight
Sampling clock and adjust until the lines clear.
26
Manual tuning
Manual fine tuning
A C 22 +2 B B C 1
Watch TV
EXIT
.
i +