2
IMPORTANT STUFF
FOR PARENTS & KIDS
Keep these instructions in a handy
location. They contain important
safety information.
Read all warnings and instructions
before you start to build and operate
the model.
WARNING: CHOKING HAZARD -
Small parts. Not for children under 3 years.
CAUTION: Keep hands, face, hair and clothing
away from all moving parts.
CAUTION: Be careful not to tip the model over.
Model should be placed on a flat and hard surface.
•
Share the K'NEX experience with your child and
make building with K'NEX a family fun adventure.
•
Take your time to enjoy the building process.
Don't rush!
•
While you're building make sure you face your
model in the same direction as the pictures show
in the instructions.
•
Product and colors may vary.
BATTERY INFORMATION
CAUTION:
•
Be sure to insert the batteries correctly and always follow the
toy and battery manufacturers' instructions.
•
Do not mix old and new batteries or alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Only batteries of the same or equivalent type recommended
should be used.
•
Always remove weak or dead batteries from the product;
do not short-circuit supply terminals.
•
Insert batteries with correct polarity (+/-) as shown.
Important Tips
•
Alkaline batteries AA (LR6) are recommended.
•
Rechargeable batteries are not recommended.
•
Remove rechargeable batteries from toy before charging;
they must be charged only under adult supervision.
•
Non-rechargeable batteries must not be recharged.
•
Keep components free of dust; do not immerse or use in
water.
•
Do not dispose of batteries in a fire; they could leak or
explode and cause injury.
•
Remove all batteries if the toy will not be used for a long
period of time.
•
Do not put rods smaller than 2 inches in any openings of the
motor; they will damage the motor, and cannot be removed.
•
Help the environment by disposing of your product and
packaging responsibly. The wheelie bin symbol indicates that
the product and batteries must not be disposed of in the
domestic waste as they contain substances which can be
damaging to the environment and health. Please use
designated collection points or recycling facilities when
disposing of the item or batteries.
How to Insert and Remove Batteries
•
Use a small Phillips head screwdriver to loosen the screw.
Insert 2 fresh AA
batteries (LR6) into
the compartment
with the correct
polarity (+/-) as
shown here.
+
Need additional building help? Go to the K'NEX web site
www.knex.com/tips.
Ayez besoin d'autre bâtiment d'aide ? Allez au site Internet
www.knex.com/tips.
