CONTENTS
Building Instructions . . . 4
Attaching the Graphic Panel . . . . .
Attaching the Coaster Car . . . . . . .
How to Use the Video Camera . . . .
Tips & Troubleshooting . . . . . . . . .
Español . . . . . . . . . . . . . . . . . . . .
2
IMPORTANT STUFF
FOR PARENTS & KIDS
Keep these instructions in a handy
location. They contain important
safety information.
Read all warnings and instructions
before you start to build and
operate the model.
50
!
WARNING: CHOKING HAZARD -
50
Small parts. Not for Children under 3 years.
52
CAUTION: Keep hands, face, hair and clothing
54
away from all moving parts.
55
CAUTION: Be careful not to tip the model over.
Model should be placed on a flat and hard surface.
•
Share the K'NEX experience with your child
and make building with K'NEX a family fun
adventure.
•
Take your time to enjoy the building process.
Don't rush!
•
While you're building make sure you face your
model in the same direction as the pictures
show in the instructions.
•
Be sure to install batteries into the motor before
you start building your motorized models.
•
Product and colors may vary.
•
Help the environment by disposing of your
product and packaging responsibly. The wheelie
bin symbol indicates the product and batteries
must not be disposed of in the domestic waste
as they contain substances which can be
damaging to the environment and health. Please
use designated collection points or recycling
facilities when disposing of the item or batteries.
•
Video Camera Car System Requirements:
PC: Windows
Vista, XP and 2000
®
M C: Macintosh
OS 9.2 or higher
®
CPU Speed: Intel
Pentium III 800 MHz or higher
®
Memory: Requires at least 128 MB & 80 MB
of free hard disc space
Software: Supports USB 2.0 and MSDC
(Mass Storage Device Controller)
BATTERY INFORMATION
Caution: To Avoid Battery Leakage
•
Be sure to insert the batteries correctly and always follow the toy
and battery manufacturers' instructions.
•
Do not mix old and new batteries or alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium) batteries. Only batteries
of the same or equivalent type recommended should be used.
•
Always remove weak or dead batteries from the product; do not
short-circuit supply terminals.
•
Insert batteries with correct polarity (+/-) as shown.
Important Tips:
•
Alkaline batteries AA (LR6) are recommended.
•
Rechargeable batteries are not recommended.
•
Remove rechargeable batteries from toy before charging; they
must be charged only under adult supervision.
•
Non-rechargeable batteries must not be recharged.
•
Keep components free of dust; do not immerse or use in water.
•
Do not dispose of batteries in a fire; they could leak
or explode and cause injury.
•
Remove all batteries if the toy will not be used for a long period of time.
•
Do not put Rods smaller than 2 inches in any openings of the
motor; they will damage the motor, and cannot be removed.
How to Insert the
Motor Batteries:
•
Use a small Phillips head
screwdriver to loosen the
screw. Insert 2 fresh AA
batteries (LR6) into the
+
compartment with the
correct polarity (+/-) as
shown here.
How to Charge the
Video Camera Car:
•
Battery charging should be done by an adult.
•
Follow these instructions carefully. Only charge by this USB
cable. Normal charging time 1-2 hours (when battery is empty).
•
Do not leave the video car unattended while it is charging.
•
Unplug the USB cord when the video camera car is charged.
•
Overcharging could result in overheating the video camera car.
•
Charge the video camera car on a non-flammable surface, keep it
away from flammable items.
•
Do not place in or near
water, heat or fire.
•
Do not short circuit the
battery terminals.
•
If the video car has been
damaged, immediately
stop use, unplug and
safely move it away from
flammable materials.
