Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Sizing
Smoke discharge
The discharge system must be for the stove
only (it is not permissible to discharge into
flues in common with other devices).
The smoke discharge takes place through the
8 cm diameter tube placed at the back.
A "T" with a condensation collection cap
should be provided.
The smoke discharge of the stove must be
connected with the outside using a steel or
black tube (resistant up to 450°C) without
obstructions.
The tube must be hermetically sealed.
To make the tubes airtight and for their even-
tual insulation, it is necessary to use material
resistant up to at least 300°C (silicone or putty
for high temperatures).
The horizontal sections can be up to 2 m long.
It is possible to have up to three 90° curves.
If the discharge tube does not insert in the
flue, an opportunely fastened vertical section
of at least 1.5 m is necessary (except for evi-
dent safety contraindications) and a wind-
proof termination (Pict.3). The vertical duct
can be inside or outside. If the smoke duct is
outside it must be insulated (Pict.4).
If the smoke duct is inserted in a flue, this
must be certified for solid combustibles and if
it is larger than 150 mm in diameter, modifica-
tion is necessary by inserting a tube and seal-
ing the discharge with respect to the parts in
brickwork.
It must be possible to inspect all the sections
of the smoke duct. If it is a fixed duct it must
have openings for inspection and cleaning.
The adjacent locale must not be used as
a garage or be a space without ventila-
tion or air exchange, a storage area for
combustible material or used for an
activity that has a fire hazard.
Pict.3: internal flue installation to do according to
norms
Pict.4: external flue installation
According to the norm UNI 10683/98, the
stove must not be in the same environment
where extractors, type B gas devices or in any
case, devices that create lower atmospheric
pressure in the locale are found.
4
Minimum 1.5 mt
Air intake
Condensation
collection cap
Insulated
tubing
Condensation
collection cap
Air intake
Tabla de contenido
