Intercom Call - urmet domus AIKO 1716/1 Manual Del Usuario

This menu will be displayed over the image coming from the door unit
• Select (Loudspeaker volume),
Up/Down.
• Select the desired value using directional buttons Right/Left
• Press (OK) to confi rm; press (X) to cancel or press MENU to quit the setting menu.
FLOOR CALL
The video door phone is equipped with a pair of terminal pins (CP) for the connection of a fl oor call button.
When a fl oor call is received, the video door phone emits a ring, according to the ring tone selected by the
user; the display does not turn on. If the user has several apartment stations in parallel, connect this button
to only one apartment station. The internal codes will ring in sequence.
AUTO-ON
The auto-on function allows to see on the display the image captured by system call modules. When the
system is in standby mode, press the button
phone (the fi rst displayed image is the one coming from the main call module number 0); press again the
button to go to the next call modules. The fi rst images displayed are those coming from the main call
modules, then secondary of the belonging column. To close the auto-on function, press twice the audio
button .
The auto-on function can not be performed if the column is already in conversation. If the auto-on function
is activated when the column is already in conversation, the video door phone will emit an alert tone.
CALLING THE SWITCHBOARD
This function allows to establish a communication with the concierge switchboard: press the button
send the call to the switchboard. If there is no answer within 10 s, the video door phone turns off and the
call will be stored in the switchboard.
§
The call to the switchboard is only AUDIO.

INTERCOM CALL

Intercom call using the directory
The device allows to perform up to 32 intercom calls.
There are two types of intercom calls: intercom call inside the same apartment and intercom call outside the
apartment (the called device must be in the same column). To perform a call from the directory:
Press the button MENU to access the menu.
•
• Select the icon
• Select the user to be called with directional buttons and press OK.
• When the call is sent, the monitor turns off.
16
(Brightness),
and press OK.
(Contrast),
and wait until the image is displayed on the video door
(Colour) using directional buttons
to
DS1716-001