Technical Specifications - Eldes EWKB5 Guia De Instalacion

Ocultar thumbs Ver también para EWKB5:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21

6. TECHNICAL SPECIFICATIONS

Compatible with:
ESIM384 v01.01.00 and up.
Supply voltage
Supported batteries
Number of batteries
Battery operation time
Display
Wireless band
Range of operating temperatures
Humidity
Dimensions
Wireless communication range
Compatible with alarm systems
• EWKB5 can be powered by 6 batteries of 1,5V Lithium AA type FR6
(IEC) / 15LF (ANSI/NEDA). When inserting the batteries into the bat-
tery slots, mind the polarity terminals!
• EWKB5 can be powered by a 8-15V == 400mA DC power supply unit.
Please use the power supply that meets the EN 60950-1 standard. Any
additional device you connect to the system, such as a computer, must
also be powered by an EN 60950-1 approved supply. When connecting
the power supply, mind the polarity terminals. DO NOT switch the po-
larity terminals places. The main circuit should be protected by short
circuit or over-current protection.
• To switch the device off, remove all batteries (if any), power down any
linked device that EWKB5 is powered from or unplug the external elec-
tric power supply. A blown fuse cannot be replaced by the user. The
replacement fuse has to be of the kind indicated by the manufacturer
(fuse F1 model – MINISMDC050F 0.5A).
Copyright © "ELDES, UAB", 2019. All rights reserved.
It is strictly forbidden to copy and distribute the information contained in
this document or to pass thereof to a third party without an a priori written
authorization obtained from "ELDES, UAB". "ELDES, UAB" reserves the right
to update or modify this document and/or related products without an a pri-
ori warning. "ELDES, UAB" hereby declares that ELDES wireless touchpad
EWKB5 is in compliance with the essential requirements and other relevant
provisions of the Directive 1999/5/EC. The declaration of conformity is avail-
able at eldesalarms.com.
ELDES WIRELESS TOUCHPAD EWKB5 V1.1
PITBULL ALARM PRO v01.00.17 and up.
8-15V == 400mA max
1,5V Lithium AA type FR6 (IEC) /
15LF (ANSI/NEDA)
6
~14 months
4.3in; 480x272 true-colour touch
screen
ISM868/ISM915
0...+50°C (+32... +122°F)
0-80% RH @ 0... +40°C (0-80% RH
@ +32... +104°F) (non-condensing)
138x96x22 mm (5.43x3.78x0.87in)
Up to 1000m (~3281t) in open areas
ELDES Wireless
EN
9
Tabla de contenido
loading

Tabla de contenido