Tools And Materials; Before You Begin - Kohler K-705700 Guia De Instalacion

Tools and Materials

Masking
Silicone
Tape
Sealant
Center
Punch
File
Assorted
Screwdrivers
Knife

Before You Begin

WARNING: Risk of serious injury. Damage prior to installation can result in glass shattering.
Inspect the glass and all parts for damage before installation.
WARNING: Risk of serious injury. Improper installation can result in glass shattering. Follow all
installation instructions.
NOTICE: Do not touch the edges of the tempered glass with tools or any other hard objects. Do not set
the unframed tempered glass directly on the floor or any hard surface.
WARNING: Risk of serious injury. Do not cut tempered glass. Tempered glass will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels can shatter. Regularly inspect the
glass and all parts for damage, missing, or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
IMPORTANT! Leave this manual for the end user. Read these instructions before installing or using this
product.
CAUTION: Risk of product damage and property damage. This shower door is very heavy. Do
not install it to plastic shower modules or drywall unless additional support is provided behind the
wall.
IMPORTANT! Record the model numbers from each box and the master model number on the
Homeowners Guide if you intend to save it, or in your records for later use. The numbers can be found on
the label, starting with a "K-". The proper model number will enable our customer service representatives
to quickly help you if needed.
Your new Kohler door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results. These instructions show the
door installed with a left side swing. Doors that swing to the right would be opposite.
Handles are purchased separately. Install the handles following the installation instructions provided
with them.
These instructions cover both 30" (76.2 cm) to 48" (121.9 cm) and 60" (152.4 cm) models. Some steps
may pertain to only one model. Make sure to follow the steps for your model of door only.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
1064866-2-C
Level [4' (1.2 m)
Tape
to 6' (1.8 m)]
Measure
Claw
Drill and
Hammer
Assorted
Bits
Miter Saw or Hack Saw with
32 Teeth Per Inch Blade
Pencil or Felt
Tip Marker
Safety Glasses
Miter Box
2
Plus:
• Drop Cloth
• Tile or Masonry Bit
(if installing onto tile walls)
1/4" and 5/32"
Hex Wrenches
Pliers
Caulk Gun
Kohler Co.