Bluetooth Operation - Trevi SB 8315 TV Guia Del Usuario

ENGLISH
Note:
When connecting to the headphone output of a TV or a device that has its own speakers, these usually are disabled and to have a
good output signal need to adjust the volume to the maximum level through the commands of TV (or device).
When connecting to the audio output of a TV-Scart (or any audio output that is not the headphone jack of another device), the level
of the sound output is constant and not adjustable via the command own the TV (or device); the speakers of the TV (or device) is
not disabled and if you want to silence them need to lower the volume completely otherwise the reproduction is in addition to the
Sound Base.
MUTE: To activate the mute function of the device via the MUTE button (18) on the remote control ; to reactivate listening press the MUTE button.
Note:
- Some audio outputs which you connect the Sound Bar (like headphone output) can have its own volume control: make sure you
have set on the source device an adequate level audio output otherwise the Sound Bar will sound even at maximum volume.
- If the sound played by the Sound Bar be distorted means that the input signal is too strong: lower the volume of the Sound Bar
or paid on a level audio source device output more low.
- In case of connection to a TV by headphone output, it may happen that the sound reproduced by the Soundbar is low even at
maximum volume; in this case try connecting the Soundbar to the audio-scart output using an adapter (not supplied).
AUX-IN
1. Plug in 3.5mm AUX cable.
2. Turn ON the unit and press INPUT (12) button to select the AUX mode till the LED light in Green color.
3. For proper playback sound refer to chapter VOLUME ADJUSTMENT AND MUTE FUNCTION.
OPTICAL INPUT
1. To use a digital optical cable (not included) to connect the OPTICAL input (5) to the digital optical output of your TV or other source
devices.
Note: Some TVs or devices it is necessary to enable the digital optical output.
2. Turn on the unit and press the INPUT button (12) on the remote control to select the OPTICAL input. The function indicator LED (1) must
become Wathet.
3. Adjust the volume using the Vol + and Vol - keys.
Note: PCM digital audio must be set on the source device for playback from this input.

BLUETOOTH OPERATION

1. Turn on the unit and press the INPUT button (12) on the remote control to select the BLUETOOTH function. The function indicator LED
(1) must become Blue;
2. The system automatically goes into search, if not for a few seconds press the BT-PAIR button (14) on the remote control or press and
hold for 5 seconds. the
3. Activate the Bluetooth functionality on the external device to be paired;
4. Start the device search. At the end select the "SB 8315TV" device;
5. Enter the password "0000" if required;
6. Press / button (24 on the remote control) to start playback and the 9 or : buttons (22 and 23 on the remote control) to select
tracks;
7. Press the BT-PAIR button (14) on the remote control for a few seconds or press and hold for 5 seconds. the M key (9) on the unit, to
stop the active connection and pair a new device.
TREBLE, BASS CONTROL AND EQUALIZER
It is possible to adjust the high and low tones on the reproduced audio:
1. Treble: press the TREBLE- (15) or TREBLE + (21) buttons to adjust.
2. Bass: press the BASS- (16) or BASS + (20) buttons to adjust.
3. Status LED indications (3) during adjustment: flashing pink indicates adjustment in progress, fixed pink at the end of regulation level.
There are also four different types of sound equalization with which to listen to music:
The soundbar has a pre-set equalizer system, press the EQ (10) buttons on the remote control during playback to select the audio dynamic
that best suits the music style being played (Music, Movie, News and 3D).
key (9) on the unit;
11
SB 8315 TV