Self-Cleaning Function - Black and Decker BXJB500E Manual De Usuario

ENGLISH (Original instructions)
Use:
♦ Unroll the cable completely before plugging it in.
♦ Ensure the blade set is fixed properly to the jar (by
turning counter clockwise) before putting on the motor
body. (Fig. 1).
♦ Place the jar onto to the motor unit; turn clockwise until
the lock clicks into place. (Fig. 2).
♦ Put the ingredients, after having first chopped them into
small piece, into the jar with liquid (do not exceed the
maximum marker).
♦ Put the lid on the jar until you hear the click; make sure it
is properly fixed in place.
♦ Put the measuring cup in the lid.
♦ Connect the appliance to the mains.
♦ Start the appliance by operating the speed control knob.
♦ To avoid a fierce, start up of the appliance, it is advisable
to start off from the lowest speed position "1" and, once
the fan has been switched on, and progressively once
the unit has started, increase the power to "2".
♦ If you wish to add more ingredients pull out the meas-
uring cup.
♦ Add the ingredients and replace the measuring cup.
♦ To stop the appliance set the speed back to "0".
♦ Serve the drink through the grate on the lid, that will filter
the mixture.
Electronic speed control:
♦ The speed of the appliance can be regulated by using
the speed regulator control (G). This function is very
useful, as it makes it possible to adapt the speed of the
appliance to the type of work that needs to be done.
Once you have finished using the appli-
ance:
♦ Stop the appliance, selecting position 0 on the selector
control.
♦ Unplug the appliance from the mains.
♦ Turn the mixing jar anticlockwise and remove it from the
motor body.
♦ Lift the jar from the motor body.
♦ Clean the appliance.
"Pulse" Function
♦ The appliance works in highest speed to achieve optimal
performance.
♦ Select the option "P" in the speed knob to operate and
release the button when you wish to stop operating.
♦ We recommend working in cycles of 3 seconds and re-
6
peating the operation until you obtain the desired result.
Safety thermal protector:
♦ The appliance has a safety device, which protects the
appliance from overheating.
♦ If the device disconnects itself and does not reconnect,
unplug it from the network and contact one of the author-
ized technical assistance services.
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
♦ Never submerge the appliance in water or any other
liquid or place it under running water.
♦ During the cleaning process, take special care with the
blades, as they are very sharp.
♦ It is advisable to clean the appliance regularly and
remove any food remains.
♦ The following pieces may be washed in a dishwasher
(using a soft cleaning program):
- Jug
- Lid
- Measuring cup
♦ The draining/drying position of the articles washable in
the dishwasher or in the sink must allow the water to
drain away easily.
♦ Then dry all parts before its assembly and storage.

Self-cleaning function:

♦ Put water and a small amount of washing up liquid in
the jar.
♦ Select the function "turbo".
Removable Blades for Effective Cleaning
♦ Loosen the blade set by turning it in clockwise direction.
(Fig.3).
♦ Remove the blade set and the sealing ring and clean
them.
♦ After cleaning, replace the blade set and turn it in
opposite direction.