Rack-Mounting The Unit - TEAC PROFESSIONAL TASCAM X-15 Manual Del Usuario

English
x
SIGNAL GND terminals
If the turntables you use are fitted with grounding wires,
connect these to these GND terminals to reduce noise and
hum.
c
AUX MIC input
Connect an auxiliary microphone to this balanced 1/4"
TRS connector, wired as follows:
TRS
GND: Sleeve
HOT: Tip
COLD: Ring
v
MAIN MIC input
Connect the main microphone to this balanced 1/4" TRS
connector, wired as follows:
TRS
GND: Sleeve
HOT: Tip
COLD: Ring
NOTE
There is another MAIN MIC input connector on the
top panel. Only use either the connector on the rear
panel or the top panel (you cannot use both at the
same time).
8
TASCAM X-15
Features and controls

Rack-mounting the unit