AD3 Axient Digital Plug-On Transmitter
The Shure AD3 plugs onto any microphone to transmit wireless audio to compatible Axient Digital AD4D and AD4Q receivers. Supporting both conventional AA
and Shure SB900-series rechargeable battery options, the AD3 features a lightweight, rugged, metal chassis that resists sweat, moisture, and debris.
Full Guide Online
Visit www.shure.com for information, resources, and the full version of the product guide.
Included Components
AA alkaline batteries (2)
USB-A to USB-C cable
Zipper bag
Pouch with belt clip
AD3 Transmitter Overview
① Display
View menu screens and settings. Press any control
button to activate the backlight.
② Infrared (IR) port
Align with the receiver IR port during an IR Sync for
automated transmitter tuning and setup.
③ Control buttons
Use to navigate through parameter menus and to
change settings.
④ Power switch
Hold the X button to power the unit on or off.
⑤ Enter button
Press to enter menu screens and confirm menu
changes.
⑥ Power LED
- Green = Unit is powered on
- Red = Low battery, or battery error
⑦ Audio LED
Red, yellow, and green LEDs indicate average and peak
audio levels.
The LED will turn red when the limiter is engaged.
⑧ USB-C port
Supplies power or charges Shure rechargeable battery.
LED indicates charging status when connected to a
power supply.
- Red = Charging
- Green = Full charge
- Yellow = Not charging
⑨ Battery compartment
Requires two AA batteries or Shure rechargeable
battery.
⑩AA battery adapter
Use to secure AA batteries. Remove when using a
Shure rechargeable battery.
⑪ XLR connector
Connection point for wired microphones, cables, and
boom poles, among other things.
80B8201
95A39299
95D2313
95A44910
⑫ Locking ring
To release the XLR connector, turn the ring counterclockwise and push in.
⑬ Pouch
Provides additional grip and protection for the transmitter.
⑭ Belt clip
Holds transmitter and microphone securely for hands-free carrying.
Optional Accessories
SB900A rechargeable lithium-
ion battery
7
SB900A