System Overview; Included Components - Shure PSM 300 Guia Del Usuario

PSM 300
®
The PSM300 Personal Monitor System delivers wireless stereo monitoring
for improved clarity and reduced feedback over traditional stage wedges.
Performers can create their own custom mixes by adjusting the stereo
blend and overall volume level at the bodypack, resulting in lower volume
on stage and enhanced audio detail. Easy to set up and operate, PSM300
features one-touch frequency syncing and solid wireless RF stability
between transmitters and receivers. With rugged, dependable hardware
and hard-working technology, Shure PSM300 Personal Monitor Systems
deliver a greatly improved monitoring experience on stage.
Features
• Send two channels of audio wirelessly to performers onstage
• Solid RF connection over a 300 foot (90 meter) range
• Create a personal mix on each bodypack with adjustable stereo
balance or MixMode two-channel mono blend.
®
• Up to 90 dB signal-to-noise ratio provides clear, detailed audio at any
volume
• Systems available with Shure Sound Isolating™ earphones
• One-touch scan and IR sync quickly and easily assigns a clean
wireless channel
• No complicated menus, just simple volume and mix controls that focus
on the performance
• All-metal half-rack transmitter
• Slim, lightweight bodypack attaches easily to a belt or guitar strap

Included Components

PSM300 Transmitter P3T
input sync
P3T Transmitter
PS23 Power Supply
SE112 or SE215 Earphones
P3R or P3RA Bodypack Receiver
*Not included in Argentina
group channel power
(1-9) (1-F)
Carrying Bag
Rackmount Hardware Kit
(2) AA Batteries*
¼ Wave Antenna

System Overview

Personal MixMode settings
Instruments
CH 1
P3T
POWER
Instrument mix (channel 1)
Instrument Mix
(Channel 1)
This example shows a typical setup for musical performance. See the
System Applications section for additional examples.
① Route audio signals
Send Instrument and microphone signals from the stage to a mixer
or PA system.
② Create monitor mixes
From the mixer, create two mixes: one of just the instruments, and a
second with just the vocals. Route each of these to separate mixer
outputs and connect them to the P3T inputs.
③ Send wireless audio to the performers
Sync the bodypacks to the P3T transmitter to send the mixes to the
performers for in-ear monitoring.
④ Adjust personal mixes
Each performer uses the MixMode knob on the bodypack to control
their own mix between the instruments and vocals .
3
Vocals
CH 2
MONO/STEREO-MX LINE/AUX L - LOOP OUT - R LEFT/CH.1 IN RIGHT/CH.2 IN ANTENNA
Vocal mix (channel 2)
Mixer Outputs
Personal MixMode settings
Instruments Vocals
CH 1 CH 2
Stage signals
to mixer inputs
Vocals
Drums
Instruments
Vocal M
(Chann
Mixer Ou