Blackmagic Studio Camera Manual De Instalación Y Funcionamiento página 242

Enabling RAW mode:
1 Press menu and select the 'setup' page.
2 Navigate to 'RAW SDI Output' and select 'on'.
Resolution and Bit Depth
The resolution of the RAW frame is 3872 pixels x 2192 lines, which includes a border that
surrounds the image data. Most users discard this border after debayering, as it can contain
image artifacts on the outer edges.
The RAW data at pixel number 16 inside the horizontal and vertical corners will therefore
correspond with the corner of the Ultra HD frame when the camera is outputting 3840 x 2160 in
the non RAW mode. The bit depth of each pixel will be 12 bits.
16
Bayer Alignment
The bayer pattern of the RAW frame provides information required for debayering the raw data
output by Blackmagic Micro Studio Camera 4K. The bayer alignment of the RAW frame is GRBG
or green, red, blue, green.
0,0
0,1
Packing
Packing describes the way in which the raw data is packed or arranged. It is important to
understand the way that the data has been packed so that it can be unpacked correctly.
The RAW frame will be packed into the active picture area of a standard UHD 422 SDI frame,
using the following repeated packing scheme:
RAW data border
RAW image pixels
3840
1,0
1,1
16
2160
16
16
Informationen für Entwickler (Englisch) 242