Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
FEATURE DETAILS
Back of Tester
NOTE: There are no user-serviceable parts inside tester.
1.
Test Lead Holders
2.
Backlit LCD Display
3.
Power-On/Off Button
4.
Flashlight Button
5.
Backlight Button
6.
Test Lead Jacks (bottom of tester)
4
Front of Tester
1
+
Positive Lead Input
Double Insulated Class II
Warning or Caution
Indicates presence of voltage > 50V AC or DC
2
Audible Continuity
Low Battery Indicator
3
POWER-ON/OFF: Press the On/Off button to turn the tester on or off.
4
The tester will automatically power-ON if test leads are applied to
a circuit and it detects voltage >12V. The tester will automatically
5
power-OFF following 15 minutes of inactivity to conserve battery life.
BACKLIGHT: Press the Backlight button to turn on/off the backlight.
The backlight will automatically power off after 3 minutes of
inactivity to conserve battery life.
FLASHLIGHT: Press the Flashlight button to turn on/off the Flashlight.
The flashlight will remain on until turned off or tester powers off.
CONNECTING TEST LEADS
USE PROPER SAFETY-RATED TEST LEADS
6
Connect test leads by inserting the black lead into the "COM" jack
and the red lead into the "+" jack. Do not test if leads are improperly
seated. Results could cause intermittent display readings. To ensure
proper connection, firmly press leads into the input jack completely.
SYMBOLS ON TESTER
COM Common / Negative Lead Input
Ground
Risk of Electrical Shock
SYMBOLS ON LCD
FUNCTION BUTTONS
OPERATING INSTRUCTIONS
INCORRECT
CORRECT
VAC AC Voltage
VDC DC Voltage
Worklight
5
Tabla de contenido
