Idiomas disponibles
Idiomas disponibles
Operating the washing machine
Briefly: On-Off / Starting a program
NA
1. Switch the washing machine on by pressing button
All the LEDS will light up for a few seconds and
the ON-OFF/DOOR LOCK Led will begin to flash.
2. Load your laundry into the washing machine and
shut the appliance door.
3. Set the PROGRAM dial to the program required.
4. Set the wash temperature (see page 11).
5. Set the spin speed (see page 11).
6. Add the detergent and any fabric softener (see page 13).
7. Start he program by pressing the START/RESET button. To
cancel it, keep the START/RESET button pressed for at least
2 seconds (see Program and Options modifiers).
8. When the program is finished, the ON-OFF/DOOR
LOCK LED will flash to indicate that the appliance door
can be opened. Take out your laundry and leave the
appliance door ajar to allow the drum to dry thoroughly.
Turn the washing machine off by pressing button
To stop or change a program:
1. Press the Start/Cancel button for 5 seconds.
2. Select ‘Pump out’
3. When the machine has finished emptying, turn the
program selector knob to the new program required.
You may need to add detergent .
4. Press the start button to start the program.
Automatic feature
Unbalance load detection
The washing machine has an inbuilt feature to prevent it from spinning to fast with an unbalanced load.
When an unbalanced load is detected, the washing machine will attempt to redistribute the load in order to balance it
evenly to achieve full spin speed.
If this is not possible and an unbalanced load remains the spin speed will be reduced, depending on the amount of
unbalanced detected. This is to prevent the machine from damaging itself or its surroundings and to prevent excessive
noise from the washing machine.
If the spin result is unsatisfactory following a reduced spin speed attempt to rectify the unbalanced load, then on
completion of the program the load can be redistributed evenly in the drum by hand. Select a spin cycle.
Note: Do not attempt to spin heavy or absorbent single items as the machine cannot distribute these evenly.
If you need to wash a single item you will need to add some other items as ballast to allow the machine to
distribute the load evenly throughout the drum.
16
.
on the program selector dial .
A typical wash load
Two wexampes of maximum load for different types of
fabric:
COTTON
= 12 Lbs (5 Kg)
SYNTHETICS 2 Children’s Dresses
.
Before washing, you can do a great deal to ensure better
results. Divide your garments according to fabric and
color. Read the labels, follow their guidelines
2 Bath Towels
1 Hand Towel
5 Shirts
5 Blouses
1 Set of Pyjamas
4 Items of Underwear
4 Shirts
4 Blouses
1 Set of Pyjamas
4 Items of Underwear
= 6 Lbs (3 Kg)
www.aristonappliances.us
Capítulos
