Automatically Accumulate; Animal Scale; Keyboard Lock; Set Backlight - Baxtran BR20 Manual De Usuario

User's Guide

6.5.5. Automatically accumulate

Press key during selfchecking, enter se ng mode, press
key to enter, press
key to select Auto. A er you set,
press
Press weight on pla orm, a er stable, you will hear beep on twice, you can add or remote weight now,
scale will beep on again a er stable, at last, remove all weight on pla orm, the last weight value will store
in memory.

6.6. ANIMAL SCALE

Let the animal on the pla orm, a er some second, if reading data change not a lot, you can hear beep
sound and reading data will be locked.
In reading data lock mode, if you add/remove big weight, display will s ll update and lock new reading
data.
You can press

6.7. KEYBOARD LOCK

You can use keyboard lock when this func on enable (see detail se ng process in sec on 7), a er keyboard
haven't use for 10 minutes, keyboard will be lock, a er enter lock status, if you press any key, display will
show k-LCk.
If you want to escape lock mode and return work mode, hold
show ULCk, return normal mode.

6.8. SET BACKLIGHT

key 3 second, display will show SEtbL, press
Hold
change backlight mode
add load on scale,

6.9. SET AUTO POWER OFF

key 3 second, display will show SEtbL, press
Hold
key, display will show SEtoFF, press
Press
change auto power off me
power off a er standby 15 minuts. Press
The indicator has 3 parameters that can be programmed by the user and a parameter to do the calibra-
on.
The calibra on can be only done by the authorized technical personnel, please, if you wish do a calibra on
contact with your authorized calibra on organism who is authorized to seal and to unseal the scale.
In order to enter the calibra on parameter it is necessary to short the K2 jumper K2 of the main keyboard.
To set parameters press the
, to enter.
The display will show the first func on,
Pressing the
Pressing will allow you to set the func on. It may be necessary to either use
the key to move the ac ve digit and then using the
key to enter the value. Use the
26
key to select , press
and together to enter/escape animal weighing mode.
(bL on
: always on,
bLoFF
: backlight always off). Press
oF on: always on,
key during selfchecing, display whill show
PO
key will cycle through the other func ons.
key to sure, display will show current RS232 mode,
Auto
indicator on.
key to enter backlight se ng, press
bL AU
: auto backlight, backlight will on when press any key or
key to sure, press
key to enter.
key to enter auto power off se ng, press
oF 5: auto power off a er standby 5 minuts,
key to sure, press
CHk.
key to leave a parameter unchanged.
BR20 - BR30 model
key un l display show P32Coñ, press
, , key 2 seconds, display will
key to scape.
key to scape.

7. PARAMETERS

Pn
(ask password), press
or set a value using
key to increment a digit, followed by the
key to
key to
oF 15: auto
,