Tabla de contenido
Idiomas disponibles
Idiomas disponibles
User's Guide
6.5.5. automatically accumulate
Press
key during selfchecking, enter setting mode, press
key to enter, press
press
key to select Auto. After you set,
Press weight on platform, after stable, you will hear beep on twice, you can add or remote weight now,
scale will beep on again after stable, at last, remove all weight on platform, the last weight value will store
in memory.
6.6. aNIMal sCalE
Let the animal on the platform, after some second, if reading data change not a lot, you can hear beep
sound and reading data will be locked.
In reading data lock mode, if you add/remove big weight, display will still update and lock new reading
data.
You can press
6.7. KEYBoarD loCK
You can use keyboard lock when this function enable (see detail setting process in section 7), after keyboard
haven't use for 10 minutes, keyboard will be lock, after enter lock status, if you press any key, display will
show k-LCk.
If you want to escape lock mode and return work mode, hold
show ULCk, return normal mode.
6.8. sEt BaCKlIght
key 3 second, display will show SEtbL, press
Hold
change backlight mode
add load on scale,
6.9. sEt aUto PoWEr off
key 3 second, display will show SEtbL, press
Hold
key, display will show SEtoFF, press
Press
change auto power off time
power off after standby 15 minuts. Press
The indicator has 3 parameters that can be programmed by the user and a parameter to do the calibra-
tion.
The calibration can be only done by the authorized technical personnel, please, if you wish do a calibration
contact with your authorized calibration organism who is authorized to seal and to unseal the scale.
In order to enter the calibration parameter it is necessary to short the K2 jumper K2 of the main keyboard.
To set parameters press the
,
to enter.
The display will show the first function,
Pressing the
Pressing
will allow you to set the function. It may be necessary to either use
the
key to move the active digit and then using the
key to enter the value. Use the
26
key to select , press
and
together to enter/escape animal weighing mode.
(bL on
: always on,
bLoFF
: backlight always off). Press
oF
on: always on,
key during selfchecing, display whill show
PO
key will cycle through the other functions.
key to sure, display will show current RS232 mode,
Auto
indicator on.
key to enter backlight setting, press
bL AU
: auto backlight, backlight will on when press any key or
key to sure, press
key to enter.
key to enter auto power off setting, press
oF
5: auto power off after standby 5 minuts,
key to sure, press
CHk.
key to leave a parameter unchanged.
BR20 - BR30 model
key until display show P32Coñ, press
,
,
key 2 seconds, display will
key to scape.
key to scape.
7. paRamETERs
Pn
(ask password), press
or set a value using
key to increment a digit, followed by the
key to
key to
oF
15: auto
,
Tabla de contenido
