Closed User Group; Phone Lock; Pin Code Request - LG G5500 Guia Del Usuario

Settings

Closed user group

This is a network service that specifies the group of people who
you can call and who can call you. For more information, contact
your network operator or service provider. If a group index is
specified, it is used for all outgoing calls. If no group index is
specified, the network will use the preferential index.
(A specific index is stored in the network.)
]
Preset: Select this to activate the previous CUG index.
]
On: You can edit the CUG indexes and activate it.
]
Off: Deactivates this function.
Security settings
Various passwords are used to protect certain features of your
phone. Refer to page 21-22 for the various passwords.

PIN code request

When the PIN code request feature is enabled, you must enter
your PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone without
your approval.
Note
Before disabling the PIN code request feature, you must enter
your PIN.
The following options are available:
• Enable: You must enter the PIN each time the phone is switched on.
• Disable: The phone connects directly to the network when you
switch it on.
80
(Menu 8.4.9)
Menu 8.5
(Menu 8.5.1)

Phone lock

When the Phone lock feature is enabled, the phone is locked
and you must enter the phone password each time the phone is
switched on. The password is factory set to 0000. To change the
phone password, refer to the Change codes – Security code
menu option [Menu 8.5.6.1]. Once the correct password has been
entered, you can use the phone until you switch it off.
The following options are available:
1
Power On
]
Enable: You are required to enter the phone password when
you switch the phone on.
]
Disable: You do not need to enter the phone password when
you switch the phone on.
]
If SIM changed: Your phone will request security code only
when you change your SIM card.
2
Once
]
After entering the correct security code, the phone will lock after
going into the idle state. If you want to disable this phone lock,
you should enter the right security code after pressing the right
soft key. If you power off in the phone lock state, when the
phone is next powered on, the phone is in the lock state.
Key lock
This function is only available in the status of the sliding keypad up.
1
Automatic
]
After setting up the automatic mode, then phone is in lock state
after 25 seconds in standby mode with the sliding keypad up.
]
To deactivate key lock, you should press the left soft key
[Unlock] plus star(*) key or slide the keypad down.
Settings
(Menu 8.5.2)
(Menu 8.5.3)
81