2. Open the protective cap of the charger
connector, and connect the charger
cable to the headset.
The indicator light is yellow during
charging. If the indicator light is not
yellow, check the charger connection.
If charging does not start, disconnect
the charger, plug it in again, and retry.
Charging the battery fully may take up to 2 hours. When
the battery is fully charged, the indicator light turns green.
3. Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 8 hours of talktime, up
to 150 hours of standby time, and up to 8 hours of music playing time.
However, the times may vary when used with different mobile phones
or other compatible Bluetooth devices, usage settings, usage styles,
and environments.
When the battery is running out of power, the headset beeps every
20 seconds, and the indicator light flashes red. Recharge the battery.
■ Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
indicator light briefly flashes green. When the headset is connected to a
paired phone and is ready for use, the indicator light flashes blue slowly.
To switch off, press and hold the power key. The headset beeps, and the
indicator light briefly flashes red.
G e t s t a r t e d
9