G e t s t a r t e d w i t h t h e W i r e l e s s H e a d s e t
1. Connect the charger cable to the headset as
shown.
2. Connect the charger to a wall outlet. The red
indicator light is displayed during charging. If
the battery is completely discharged, it may
take a few minutes before the red indicator is
shown. Fully charging the battery may take
up to 2 hours depending on the charger.
3. When the battery is fully charged, the green indicator light is displayed.
Disconnect the charger from the wall outlet and the headset.
Low battery charge
The fully charged battery has power for up to 6 hours of talk time or up to 160
hours of standby time. In the standby mode, the headset is switched on but no call
is in progress.
When the battery is running out of power, the headset beeps and the red indicator
light starts to blink. Charge the battery as described above.
■ Switch the headset on or off
To switch on: Press and hold the power key for 2 seconds. The headset beeps and
the green indicator light starts blinking rapidly. The blinking continues more slowly
after the headset is connected to your phone.
To switch off: Press and hold the power key for 2 seconds. The headset beeps and
the red indicator light is briefly displayed.
8