Squeegee Blades Disassembly/ Assembly - CTM MIZAR Manual De Instrucciones

7.7 SQUEEGEE BLADES DISASSEMBLY / AS-
SEMBLY
Remove the squeegee from its support (see 7.6).
Completely unscrew the fixing knobs of the plastic
support of the squeegee blades (Photo 18 - A);
press on the bolts of the plastic support of the
rubber blades (Picture 19 - A) on both sides until
the plastic support comes out from the body of
the squeegee (Picture 20 - A).
Remove the rubber blades from the plastic sup-
port by pulling the blade at its end (Photo 21 - A).
Assemble the new rubber blade on the plastic
support, inserting the plastic pins of the support
into the corresponding holes on the blade.
Re-insert the plastic support inside the body of
the squeegee and fix it firmly by tightening the fi-
xing knobs (Photo 19-A) (Photo 18-A).
Assemble the squeegee on its support (see 7.5)
A
Photo 19
A) Bolts of the plastic support of the rubber bla-
des
A
Photo 21
A) Rubber blade of the squeegee
7 - OPERATING INFORMATIONS
.
A
A
B
A) Fixing knobs of the plastic support of the
squeegee blades
B) Fixing bolt of the squeegee
A) Plastic support of the rubber blades
37
B
Photo 18
A
Photo 20
A