Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. GENERAL
1.1 General terms of delivery
Any equipment, even CARRIAGE and PACKING FREE, travels at the consignee's risk. The consignee
shall make reserves in writing on the carrier's delivery bill if he notes damage caused during the
transport (confirmation to be sent to the carrier within 48 hours by registered mail and Acknowledgement
of Receipt).
1.2 Voltage
Prior to any operation, check that the voltage on the identification plate of the appliance corresponds to
the mains voltage provided on site.
1.3 Water treatment
In order to use our appliances in the best conditions, swimming pool water shall comply with the
following values: free chlorine: max. 2.5 mg/L, total bromine: max. 5.5 mg/L, pH between 6.9 and 8.0.
For any other treatment, the fitter and the user shall apply to the supplier of the planned disinfection's
process (chemical, electrochemical or electro-physical) for the compatibility with the materials of our
appliances. In any case, treatment shall be installed downstream the heating equipment.
2. DESCRIPTION
2.1 Presentation
Digital regulation thermostat + "on/off"
button and heating indicator
Cover fixing
fittings ½ union PVC Ø63 + reduction Ø50
Note: drain plug is in Ø15/21.
2.2 Dimensions
Power supply cable 2P-T 10/16A 3G1
screw
*dimension with ±1mm
Dimensions in mm
Heatline in case 20
Heatline in case 40
Heatline in case 70
¼ turn valve
Ø26/34
Circulator
thermostat
sensor + pocket
multitubular titanium
heat exchanger
drain plug for primary
A
B
535
198
535
198
665
328
2
Male heating fitting Ø26/34 +
solder fitting Ø20/22
Stuffing box
Screw permitting
access to the
electrical box
circuit
orifice blocked (with threading Ø
26/34 female) on exchanger body 70
kW: never use a primary circuit
connection!
¼ turn
valve
Ø26/34
Check valve
Ø26/34
Flow rate
controller
Only on
Heatline in
case 70
Capítulos
Tabla de contenido
