Using The Thermostat; Thermostat Overview; User Menu; Thermostat Operation - Emerson 80 Serie Instrucciones De Instalación Y Operación

USING THE THERMOSTAT

THERMOSTAT OVERVIEW

Before you begin using your thermostat, you should be familiar with its features, display and
the location/operation of the thermostat buttons and switches.
THERMOSTAT BUTTONS AND SWITCHES
1.) Fan Switch
2.) System Switch
3.) Backlight Button (located on the top
of the thermostat
4.) Set Correct Time
5.) Hold a Permanent Temperature
6.) Cancels Hold – Returns to Programmed
Schedule
7.) Raises Temperature Setting
8.) Access Menu Options
9.) Lowers Temperature Setting
13 14
12
1
11
2
23
10
4
Whenever " " appears in the display, new premium brand AA alkaline batteries
Replace
should be installed. If the house will be unoccupied for an extended period and either "
or " " is displayed, install new batteries before leaving.
Replace
5
THE DISPLAY
10.) Thermostat is protecting the equipment from short
cycling (5-minute delay)
11.) Indicates that the system is running in cool or heat
12.) Displays the current time
13.) Battery status indicator
14.) Low battery indicator
15.) Day of the week used when programming a schedule
16.) Permanent hold (bypassing the schedule)
17.) Temperature setpoint
18.) Appears when the keypad is locked (to prevent unwanted
changes)
19.) Next (Menu button) is used to navigate within a menu
20.) Access the schedule and customize thermostat features
21.) Back (Run button) is used to navigate within a menu
22.) Exit (Hold button) returns to the home screen
23.) SEE TROUBLESHOOTING
3
15 16 17
21
20
22
5 6

USER MENU

To customize thermostat settings, press the Menu button from the home screen. Use the
or buttons to highlight Settings and press Next. Use Next and Back to navigate
through menu items. Press
User's Menu #
(Press Menu button
and release)
01
02
03
04
05
06
07

THERMOSTAT OPERATION

Set Current Time and Day
Note: Time icons will flash at initial power up or after a reset.
1.) Press Set Time
2.) Use
3.) Press Next to advance to set the minutes and day of the week
4.) Press Exit when finished.
The default program is 5-1-1 Day, but can be setup as a 7-Day or Non-Programmable
7
thermostat (refer to the User Menu above)
18
• Hold Temperature (bypassing the schedule) – With the System switch set to Heat or
8
Cool, momentarily press the Hold button. Hold will be displayed. Use
the temperature. The thermostat will hold the room temperature at the selected setting
until you press Run to start program operation again.
9
• Program Override (Temporary Hold) – Press
displayed. The thermostat will override the schedule until the next programmed time
period with a minimum override of 2 hours. Then the thermostat will automatically revert
to the program.
19
• Keypad Lockout – To prevent unwanted changes, the buttons can be disabled. To turn
this feature On, press and hold
also be turned on in the menu). To turn Off, press and hold
seconds.
"
or to change the setting.
Description
Schedule Type (set as either 7-Day,
5-1-1 Day or Non Programmable)
Early Start (starts heating or
cooling early so your programmed
temperature is reached by the
programmed time)
Fahrenheit or Celsius
Temperature Display Adjustment
(adjust the Room Temperature)
Continuous Display Light (keep
the backlight always on – "C" wire
required)
Change Air Filter (set up a monthly
reminder)
Keypad Lock (prevent unwanted
changes to the thermostat)
or to adjust the hour
and the Menu button until the
Default Setting Settings
or )
(flashing icons) (Press
7 – 7 Day
5 5 – 5-1-1 Day
0 – Non-programmable
On – start early
OFF OFF – start at program
period time
°F – Fahrenheit
°F
°C – Celsius
0 -5 to +5
On – always on
OFF
OFF – momentarily
1 to 12 – reminder time
OFF (months)
OFF – no filter reminder
On – disable buttons
OFF
OFF – all buttons are active
or to adjust
or until the desired temperature is
icon appears (this can
and the Menu button for 3
6