Ceiling Fan Assembly - Emerson PORTLAND CF965BS00 Manual Del Usuario

3.1
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to install the
ceiling fan mounting plate on the outlet box.
3.2
Remove the shipping spacers and the spacer attachment
screws from the motor before installation of blade
assemblies (Figure 1).
Discard the spacers and spacer screws.
3.3
Mount blade flanges to fan blades using three
#10-32 x 1/4" slotted phillips washer head screws
(supplied) (Figure 2).
Repeat this procedure for other four fan blades and blade
flanges.

3. Ceiling Fan Assembly

5
WARNING
!
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
Figure 1
#10-32 x 1/4" SLOTTED
PHILLIPS WASHER HEAD
SCREW (3 per blade)
FAN BLADES (5)
FAN BLADE
FLANGES (5)
Figure 2
Please contact 1-800-654-3545 for further assistance
SPACER ATTACHMENT
SCREW
SHIPPING
SPACER
emersonfans.com
ETL Model No.: CF965