Installing The Faucet - Emerson insinkerator Manual Del Usario

2

INSTALLING THE FAUCET

A
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
B
Mounting Gasket
Deck Plate
C
D
I I
Unpack faucet components.
I I
On a firm, flat surface, carefully
straighten the copper tubing.
I I
Slide plastic mounting gasket over
all tubes descending from faucet
body and seat mounting gasket into
bottom of faucet until flush.
I I
Position supplied deck plate over
the hole into which the faucet will
be installed.
I I
With mounting gasket in place, feed
tubes down into hole until faucet
rests on deck plate (see illustration).
I I
From under the sink, place the
metal mounting plate onto the
threaded stud.
I I
Make sure faucet head is at the
desired angle.
I I
Place the supplied lock washer and
hex nut on to the threaded stud.
I I
Tighten to secure the faucet to the
sink top. Do not overtighen.
5