Emerson insinkerator Manual Del Usario página 4

START HERE
1
PREPARATION
A
Required minimum from
The wall outlet for your faucet must have power supplied to it continuously
and must be fused. It should not be controlled by the same wall switch
B
If you have to drill through sink or
countertop, you may need to rent or purchase
C
Required Hole Diameter
Consult a professional before drilling into
a surface other than stainless steel.
4
PROPER INSTALLATION SHOULD TAKE ABOUT 2-4 HOURS
center of hole to wall
"
2
Maximum counter
thickness (depth)
1 1 ⁄ "
2
that operates a food waste disposer.
the appropriate tools.
1 1 ⁄ " - 1 1 ⁄ "
4 2
I I
Identify locations for the faucet and
tank.
I I
Check to make sure there is proper
clearance for faucet handle to be fully
opened.
I I
Check to make sure counter is not
too thick.
I I
Make sure there is a grounded
electrical outlet under the sink.
I I
Turn off water supply.
I I
If using the sink sprayer hose hole,
remove nut that connects sprayer
hose at bottom of faucet.
I I
Using adjustable wrench, remove nut
connecting sprayer washer flange in
sprayer hole.
I I
Plug hose opening with either a 1/8"
plug or a 1/4" cap (not supplied).
What if you don't have a sprayer hole or
don't want to use it?
I I
Many homeowners replace the soap
dispenser in their sink with an instant
hot water dispenser.
I I
If drilling a hole into a stainless steel
sink or counter top, you can cut a
mounting hole for the faucet with a
hole saw for stainless steel, or you can
use a hole punch.