König Electronic CMP-NWIPCAM11 Manual De Uso página 4

Select the IP Camera and click <Set>, or double click the IP Camera to set the
IP address information, as shown in the figure below:
Note: With the Search IP Camera software, an user can not only retrieve equipment
across different network sections, but also change network parameters.
The user can set the IP address of the IP Camera to be in the same network
section as the PC.
Therefore, it is unnecessary to modify the IP address of the PC. For example, if
the IP address of the PC is 192.168.91.66, the user can set the IP in the parameter
setting page of Search NVS software to 192.168.91.1, set the gateway and DNS to be
the same as those of the PC, and set both the user name and password to admin.
To access the IP Camera, enter 192.168.91.1 in the address bar of IE. After modifying
the network parameters, click <OK>.
4