Tabla de contenido
Service the Drawer
Drawer Removal
Slide the drawer out on the rails until fully extended.
Pull both release latches toward you, then pull the front of the drawer up off the
rails.
Lift the drawer out from the vanity.
Drawer Reinstall
Fully extend the rails.
Align the grooves on the underside of the drawer with the rails, then set the
drawer into place.
Hold the drawer in place on the rails with one hand. With your other hand, pull
the tab on the bottom front of the rail toward you until you hear the rail "snap"
into place. Repeat this step for the remaining rail.
Ensure the drawer is locked into place by lightly lifting the front of the drawer
upward. If the drawer does not lift up, it is properly engaged. If the drawer lifts
up, repeat the "Reinstall" procedure.
Slide the drawer in and out of the vanity to ensure smooth operation.
Drawer Adjustment
Slide the drawer out on the rails until fully extended.
Turn the drawer height adjustment lever to adjust the drawer height. To lower the
drawer: Press and hold the lever. Push the lever back to raise the drawer or pull
the lever forward to lower the drawer.
Dépanner le tiroir
Extraction du tiroir
Glisser le tiroir hors des rails en pleine extension.
Kohler Co.
17
1110179-2-A
Tabla de contenido
