Idiomas disponibles
Idiomas disponibles
================================================================================================
STEP 3-A
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Find this hardware:
- x4 Round Head Screws (20)
5/16" x 1"
Place the rocker Base
Plate (1) against the bed of
the cart.
NOTE:
Alignment of this part
HAPPENS HERE
For alignment and drilling
purposes, temporarily add the
pivot arms (2 and 3) as illustrated.
Using four of the existing cart
holes, slide four 5/16" x 1" Round
Head Screws (20) in place.
Note: No need to tighten with a
nut, you will remove the pivot
arms after this step.
English Manual
ASSEMBLY
1
20
20
20
1
6
2
20
1018671-A
3
