Idiomas disponibles
Idiomas disponibles
================================================================================================
STEP 8-B
- - - - - - - - - - - - - - - - - - - - - - - -
Find this hardware:
- x2 Bolt; Hex Head (19)
3/8" x 1 1/4"
- x2 Washer; Flat (14) - 3/8"
- x2 Nut; Nylon lock,
3/8" (11) - 3/8"
Add a washer (14) to each bolt (19).
As illustrated here, run these bolts
through the bushings that were
added on step 8-A.
Be sure to allow movement,
however, loosely secure in
place with two Hex Head Locking
Nuts (11).
STEP 9
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Find this hardware:
- x2 Bolt; Carriage (18) - 5/16" x 1"
- x2 Nut; Nylon Lock (12) - 5/16"
Align the Rocker
Handle (8) with the
square holes of the
Rocker Motion Bracket
(7) as illustrated here.
Add both Bolts (18) from beneath the
Rocker Motion Bracket (7), through
the handle (8) and secure in place
with a Nylon Lock Nut (12).
Finally, slide the
grip (22) over the end
of the handle (8).
English Manual
ASSEMBLY
19
14
11
8
22
13
11
Label is on the
other side of the
handle, facing up
after the cart is
flipped over.
12
12
7
14
19
18
18
1018671-A
