Technical Data - Marmitek PROGUARD800 Serie Manual Del Usario

Figure B.11: KR814
To replace the batteries:
1. Insert a small screwdriver into the pry-off
slot – see Figure B.12 Carefully twist the
screwdriver to separate the front and
back of the casing.
2. Observing correct polarity, replace the
batteries (3V lithium, size: CR1225).
3. Close the casing making sure that the
front and back click shut.

TECHNICAL DATA

PR811
Antenna:
Frequency:
Power:
RFI Immunity:
Operating Temperature:
Dimensions:
KR814
Antenna:
Frequency:
Power:
Current Consumption:
RFI Immunity:
Operating Temperature:
Dimensions:
Specifications may be modified without prior notice.
3
KR814
The KR814 is a four-button keyfob transmitter that
offers a number of functions including arm, disarm
and SOS Panic.
When the battery is low, the KR814's LED flashes
during transmission and a Low Battery signal is sent
to the receiver. When either of these two indications
are observed, replace the batteries.
Built-in Whip
868.35MHz FM
Non-replaceable battery
40V/m
0 to 60°C
60 x 40 x 15mm
Built-in Whip
868.35MHz FM
2 x 3V Lithium Battery Size CR1225
16mA (transmission)
2µA (standby)
40V/m
0 to 60°C
62 x 42 x 15mm
Figure B.12: Opening the
KR814's Casing
© MARMITEK