Setting The Time - Bulova 933 Manual De Instrucciones

A. SETTING THE TIME
1. Pull the setting crown out to position "2" (See diagram). If the crown has a "screwdown"
lock, then unscrew the crown lock first by turning the crown towards you,
then pull it to position "2".
2. Turn the crown to move hands move clockwise until the date changes at approximately mid-
night.
3. Continue moving the hour and minute hands to the correct time. If it is after noon,
turn the hands past 12 o'clock again (noon) to set the correct time.
4. When the correct time is set, push the crown back to the "NORMAL" wearing position.
B. SETTING THE DATE
1. Pull the crown to position "1" (See previous diagram).The watch will continue to run. Turn
the crown away from you to advance to the current date.
2. Once the correct date is set, push the crown back to the "NORMAL" wearing position.
NOTE: Do Not set the date as above between the hours of 9:00 PM and 1:00 AM. This
may cause the date to be incorrect and the date will have to be reset later.
C. CHRONOGRAPH (CHRONO) ADJUSTMENT
This MUST be done BEFORE using the Chrono the first time. It does not need to be
repeated unless the watch receives an impact sufficient to move the hand out of position,
or if the battery has been changed.
NOTE: When using the buttons for these adjustments, each button push will move the hand
4