INSTALLING & REMOVING UV-C bULb
CHANGE bULb INDICATOR
The blue light on the front of air cleaner will begin to flash continuously when it is time to replace
the UV-C bulb. Replace the bulb according to the directions then press the UV control button and
hold for 5 seconds to restart the system. The light should remain a constant blue.
REPLACE bULb
1. Remove the Rear Cover
2. After removing the Rear
of the unit by pushing
Cover from the unit, remove
Lock & Release Button.
the Combination Filter.
AC4825 SERIES
3. After removing the Combination
4. The UV-C Bulb is removed
Filter, use a Philips head
by carefully grasping the
screwdriver to remove two (2)
bulb with a clean cloth or
screws and detach the UV-C
tissue and pulling the bulb
Metal Shield.
straight out of the unit.
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit.
6. Push and hold UV Control Button for 5 seconds to reset UV Bulb Change Indicator.
REPLACEMENT bULb: Lb4000
AVAILAbLE AT 866.603.5900 OR WWW.GUARDIANTECHNOLOGIES.COM
E-10
Continue reading below for
remaining instructions on how
to Install & Remove the UV-C
bulb for the AC4825 Series and
the AC5000 Series.
PULL UV-C bULb
STRAIGHT OUT OF UNIT
bulb is NOT visible until
the UV-C METAL SHIELD
has been removed.
INSTALLING & REMOVING UV-C bULb
AC5000 SERIES
3. After removing the
4. The UV-C Bulb is removed
Combination Filter,
by carefully grasping the
use a Philips head
bulb with a clean cloth or
screwdriver to remove
tissue and twisting the bulb
four (4) screws and
1/4 turn. Remove from unit.
detach the UV-C
Metal Shield.
5. The UV-C Bulb is reinstalled by reversing the process in Step 4.
6. Push and hold UV Control Button for 5 seconds to reset UV Bulb Change Indicator.
REPLACEMENT bULb: Lb5000
AVAILAbLE AT 866.603.5900 OR WWW.GUARDIANTECHNOLOGIES.COM
IMPORTANT
:
The UV-C Bulb should be replaced every 10 - 12 months depending on use.
Please contact Customer Service at 1.866.603.5900 or visit us at
www.guardiantechnologies.com to purchase a replacement bulb.
TWIST bULb 1/4 TURN
TO REMOVE bULb
bulb is NOT visible until
the UV-C METAL SHIELD
has been removed.
E-11