Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
10
Troubleshooting
1
The suction power is insufficient
-
Perhaps the dust container is full.
If necessary, empty the dust container.
-
Perhaps the filters need to be cleaned or replaced.
If necessary, clean or replace the filters.
-
Perhaps the suction power slide on the handgrip is open.
Close the slide.
-
Perhaps the electronic suction power control (specific types only) has been set to a low setting.
Set the control to a higher setting.
-
Perhaps the nozzle, tube or hose is blocked up. (Fig. 31)
-
To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible)
the other way round. Switch on the vacuum cleaner to force the air through the blocked-up
item in opposite direction.
Tabla de contenido
